WinPOWER SE 335-861 kW Scroll

WinPOWER SE 335-861 kW Scroll

Compact and High Efficiency Series with R410a Gas
4 - 5 - 6 stage capacity control,
Easy installation with Tank & Pump accessories
2-pipe + heat recovery (RC100) option
Internal Original/Substitute control

Eurovent Certified Superior Performance
High Energy Efficiency and All-Season Comfort
Wide and Smart Choices
Increased outdoor air operating limits
Energy Saving Special Solutions for Commercial and Residential Buildings

STRUCTURAL FEATURES

  • Compressor Hermetic scroll compressor with thermal protection and crankcase heater.
  • High efficiency at partial capacities with 4-5-6 capacity control.
  •  Evaporator Stainless steel polyurethane insulated plate evaporator with differential pressure switch and internal victaulic connection.
  •  Condenser Micro channels (TCAEY) or copper tube/aluminum fin condenser
  • Fan: Axial fan with built-in thermal protection and protection grille.
  • Control: Microprocessor control with Adaptive Function Plus.
  •  Carcass structure: Powder polyester painted galvanized steel structure

STANDARD FEATURES

  • Fan and compressor circuit breaker switches,
  • High and low pressure gauge
  • Master/slave control of up to 4 units connected in parallel.
  • Time card

VERSIONS

  • B - Standard version, cooling only (TCAEBY) - heat pump unit (THAEBY)
  • S - Silent version, cooling only (TCAESY) - heat pump unit (THAESY)

FACTORY ASSEMBLED ACCESSORIES

  • Shell&tube evaporator,
  • Single or double pump. 1 primary and 1 backup applications in double pump options
  • Standard and high pressure versions of the pumps are optional.
  • TANK and PUMP UNIT: Accumulation tank up to 700 - 1000 liters depending on the model with expansion tank, manual air bleed valve, safety valve and water side pressure gauge. Pumps are available in low and high pressure versions.
  • Variable flow pump (VPF: Variable Primary Flow) control,
  • Partial heat recovery option (Desuperheater)
  • Full heat recovery (% 100 heat recovery) option,
  • FI-10 kit: Operation at -10ºC outside temperature (Condensation control) (standard on S versions),
  • FI-15 kit: Operation at -15ºC outdoor temperature (Condensation control) (with EC motorized fans)
  • Condensation control with high pressure fans
  • Power factor correction capacitor (Cos?>0.94),
  • Forced limit of power consumption,
  • Forced noise limit
  • Energy parameters measuring device,
  • Energy efficiency optimization,
  • Soft start (soft starter),
  • Sound-insulated compressor box or compressor box and refrigeration circuit sound insulation (THAEY)
  • Compressor sound isolator,
  • Cooling circuit suction and discharge valves,
  • Refrigerant leak detector,
  • Refrigerant circuit high and low pressure gauges,
  • Double safety valves,
  • Digital input for dual set points,
  • Metal filters (THAEY) or condenser coil protection grids,
  • Micro channels condenser with epoxy coating (TCAEY),
  • Copper/copper or copper/coated aluminum condenser (THAEY),
  • Minimum/maximum power supply control,
  • Digital input for dual set points,
  • Setpoint shift (4-20 mA analog signal),
  • Evaporator heater for frost protection, electrical panel, accumulation tank, electric pumps and heat exchangers for heat recovery, if applicable;
  • Low temperature water production,
  • Interfaces for serial communication with other devices,
  • Vibration receivers

Arcelik Air Cooled Chillers Download