Cooling and Heat Pump Options Onlyı
Axial Fan Air Cooled Water Chillers & Heat Pumps
Hermetic Scroll Compressors
Environmentally Friendly R410A Refrigerant Gas
Up to ESEER 4.32
High Energy Efficiency & Comfort in All Seasons
Wide and Smart Choices
Integrated Adaptive Cooling Technology
Energy Saving Customized Solutions for All Commercial Buildings & Residences
STRUCTURAL FEATURES
• Compressor Hermetic, scroll compressor, thermal protection and oil pan heater added.
- 2, 3 or 4 capacity levels with high efficiency at partial loads.
• Water Side Heat Exchangers: The closed cell is completed with stainless steel plates with polyurethane foam insulation and water flow differential pressure switch.
• Air Side Heat Exchangers: Finned coils or microchannels developed with copper tubes and aluminum fins according to models and dimensions.
• Fan: Electric axial fans with external rotor equipped with internal thermal protection and protection grilles.
• Control: Microprocessor electronic control with Adaptive Function Plus.
• Structure: Painted with polyester powders and made of galvanized steel sheet.
STANDARD FEATURES
-Compressor and fan thermal overload switches.
-High/low pressure gauge for refrigerant circuit.
-Electronic expansion valve.
-Clock panel showing date/time.
VERSIONST - High performance version with large coil area
(TCAETY - THAETY)
Q - Super quiet version with soundproof compressor compartment, super low speed fans and large coil surface
(TCAEQY - THAEQY)
FACTORY ASSEMBLED ACCESSORIES
- Shell and Tube evaporator.
- The only one with an automatic pump that can be used in standby mode
The pumps are available in low or high pressure versions.
- TANK & PUMP with 300-700 liters (depending on model) structural storage tank and single or double pump, with expansion tank, air discharge valves, safety valve and water side pressure gauge.
- Variable flow pump management.
- Superheated steam cooler.
• %100 ısı geri kazanımı
- Electronic expansion valve
-10°C condensation control
- 15°C condensation control with EC motorized fans (standard on Q version)
- Condensation with overpressure fans
- Load factor correction capacitors (cosφ > 0.91)
- Mandatory power usage limit.
- Mandatory noise suppression.
- Meter energy parameters.
- Optimized energy efficiency.
- Soft start device.
- Soundproof compressor box.
- Compressor sound blankets.
- Refrigerant leak detector.
- Low and low pressure gauges for each refrigerant circuit.
- Metal filters or coil protective grids.
- Copper/copper or copper/pre-painted aluminum coils.
- Digital input for dual setpoint.
- 4-20 mA analog input for variable setpoint.
- Evaporator antifreeze resistor, buffer tank, pumps and heat exchangers for heat recovery if available.
- Buffer tank integrative heaters.
- Low temperature water production.
- Interfaces for serial communication with other devices.
- Anti-vibration supports.
Arcelik Air Cooled Chillers Download
